Bearings Name	New Model	Old Model:	ID(mm)	OD(mm)	Width(mm)	Cr(kN)	Cor(kN)	Grease Lubrication Speed(r/min)	Oil Lubrication Speed(r/min)	Weight(kg)
6201-2RS deep groove ball bearing	6201-2RS	180201	12	32	10	—	—	—	—	0.036
6201-2RS/Z2 deep groove ball bearing	6201-2RS/Z2	180201EZ2	12	32	10	—	—	—	—	0.036
6201-2RS/Z3 deep groove ball bearing	6201-2RS/Z3	180201Z3	12	32	10	—	—	—	—	0.036
6201-2RS/Z4 deep groove ball bearing	6201-2RS/Z4	180201Z4	12	32	10	-	-	-	-	0.037
6201-2RS/Z1 deep groove ball bearing	6201-2RS/Z1	180201Z1	12	32	10	-	-	-	-	0.036
6201-2RS/p6 bearings SKF,NSK,NTN,FAG,NACHI,KOYO	6201-2RS/P6	E180201	12	32	10	-	-	-	-	0.036
6201-2RS/p5 bearings SKF,NSK,NTN,FAG,NACHI,KOYO	6201-2RS/P5	D180201	12	32	10	-	-	-	-	0.036
6201-2RSV deep groove ball bearing	6201-2RSV	-	12	32	10	-	-	-	-	0.035
6201-2RS/C3HT deep groove ball bearing	6201-2RS/C3HT	3G180201HT	12	32	10	-	-	-	-	0.034
W6201-2RSNR Ceiling Fan Bearings	W6201-2RSNR	-	12	32	15.9	-	-	-	-	0.055
W6201-2RS Ceiling Fan Bearings	W6201-2RS	-	12	32	15.9	-	-	-	-	0.055
6201-8-2RS deep groove ball bearing	6201-8-2RS	-	12.7	32	9	-	-	-	-	0.000
6201-13-2RS Ceiling Fan Bearings	6201-13-2RS	-	13	32	9	-	-	-	-	0.000

A 6201 2RS bearing is a specific type of ball bearing. Here's what the information in the designation means:

"6201" refers to the bearing's size and dimensions. In case, it indicates that the bearing has a bore diameter of 12 mm, an outer diameter of 32 mm, and a width of 10 mm.
"2RS" indicates the bearing's sealing configuration. The "2RS" stands for two rubber seals on both sides of the bearing, which help to protect it from contaminants and retain lubrication.
Overall, a 6201 2RS bearing is commonly used in various applications, including machinery, motors, bicycles, and more, where moderate radial loads and low to moderate axial loads are encountered.

This 6201-2RS ball bearing is a high-precision premium quality sealed deep groove 12x32x10 ball bearing made to ABEC 3 precision standards from AXIS. What sets this 6201-2RS bearing apart from others is the ABEC 3 precision standard that this bearing is made to, the grade 10-balls used, and the superb electric motor quality rating (EMQ). ABEC 3 means that the bearing itself has a micron deviation from a nominal of 20.000mm of -8 micrometers. The standard ABEC 1 precision standard that almost all ball bearings are made to today has a deviation of -10 micrometers. In simple terms, the more precision a bearing is, the better it will perform in any given application. The grade 10 balls within this bearing are typically only found within ABEC 5 or higher bearings because of their more true roundness and precision. The balls within a bearing share the load capacity, so this also increases the working life versus the standard grade 25 balls used in other brands. The electric motor quality rating means that the bearing must operate at an extremely low noise level with minimal to no vibration. To achieve this, the 6201-2RS bearing features raceways that are precision honed to a superb finish.

More specifically, 6201-2RS ball bearings are found in a wide range of industrial and automation applications. They are designed to reduce rotational friction and support loads. The load is spread evenly across the grade 25 balls and as the inner bearing race rotates so do the balls. The seals located on each side of the ball bearing keep the bearing lubricant in while keeping unwanted contents out. For additional information or to get a quote on a 6201-2RS bearing contact our customer support team and we will be happy to assist you!