The outer spherical ball imported bearing is actually a variant of the deep groove ball imported bearing. Although its basic performance should be similar to that of deep groove ball bearings, because these bearings are mostly used in relatively rough machinery, the installation and positioning are not accurate enough, the axis alignment between the shaft and the seat hole is poor, or the shaft is long and deflected. In the case of large and other, and the bearing itself is not high enough precision, and some structures are also rough, so the actual performance of the common performance should be marked with a considerable discount compared with the deep groove ball bearings of the same specification. For example, the outer spherical ball bearing with top wire is applied to the through shaft with large stiffness difference and large deflection. This kind of bearing has sealing rings on both sides, which can strictly prevent the intrusion of dirt. It is filled with an appropriate amount of lubricant before leaving the factory. No need to add lubricant, when the jack screw on the protruding end of the bearing inner ring is fastened on the shaft. The allowable axial load shall not exceed 20% of the rated dynamic load. The outer spherical ball bearing with eccentric sleeve has basically the same performance as the outer spherical bearing with top wire, but the top wire is not on the inner ring, but on the eccentric sleeve. The inner hole of the tapered hole outer spherical ball bearing is a tapered hole with a taper of 1:12, which can be directly installed on the tapered shaft, or installed on the shoulderless optical shaft with the help of an adapter bushing, and can fine-tune the bearing clearance.
Pro: CSA205 Outer Spherical Bearing | Next: CSA204-12G outer spherical bearing
Technical Data of CSA204G outer spherical bearing
Bearing Types: Outer Cylindrical Ball Bearings | Bearing Brands: |
New Model: CSA204G | Old Model: - |
Inside Diameter(mm):20 | Outside Diameter(mm):47 |
Cor(kN): - | Cr(kN): - |
Oil lubrication Speed(r/min):- | Weight(KG):0.180 |
Width(mm): 29.5 | Grease lubrication speed(r/min): - |
Dimensions: | 20×47×29.5×14 mm |
Seals Type: Zz, Open, 2rs | Material: Chrome Steel, Stainless Steel, Gcr15 |
Precision Rating: P6, P0, P5, P4, P2 | Cage Material: Steel, Steel Cage, Nylon |
Feature: Long Life, High Speed, Heat Resistant | Lubrication: Oil, Grease |
Type: | Spherical Bearings |
Spherical Bearings, also known as spherical plain bearings or ball joint bearings, are mechanical components used to accommodate rotational or angular misalignment between two machine parts. They consist of an inner ring with a spherical convex outside surface and an outer ring w
Introducing the high-performance Deep Groove Ball Bearing 6004 – your ultimate solution for smooth and efficient operation in a wide range of industrial applications. Designed with precision and durability in mind, this top-of-the-line bearing is crafted using premium qu
There are many different brands that manufacture bearings, and some of the most well-known include: 1. SKF: SKF is a leading global manufacturer of bearings, seals, and lubrication systems. 2. Timken: Timken is a renowned manufacturer of bearings and related products, servi
The UCF 210 bearing is a type of bearing that belongs to the UCF (Unitized Bearing Series) series. It is commonly used in various industrial applications, particularly in machinery and equipment that require mounted bearings. Here's some information about the UCF 210 bearing
ZZ Bearing (Shanghai) Co., Ltd.
Add.: NO.18 Dongwu road, Songjiang Industrial Zone, Shanghai, China
Contact:Paul.Wu
Phone:+86-13167029626
Tel: +86-21-51061761
E-mail: sales@bearings-factory.com