6205S-2RS outer spherical bearing

The outer spherical ball imported bearing is actually a variant of the deep groove ball imported bearing. Although its basic performance should be similar to that of deep groove ball bearings, because these bearings are mostly used in relatively rough machinery, the installation and positioning are not accurate enough, the axis alignment between the shaft and the seat hole is poor, or the shaft is long and deflected. In the case of large and other, and the bearing itself is not high enough precision, and some structures are also rough, so the actual performance of the common performance should be marked with a considerable discount compared with the deep groove ball bearings of the same specification. For example, the outer spherical ball bearing with top wire is applied to the through shaft with large stiffness difference and large deflection. This kind of bearing has sealing rings on both sides, which can strictly prevent the intrusion of dirt. It is filled with an appropriate amount of lubricant before leaving the factory. No need to add lubricant, when the jack screw on the protruding end of the bearing inner ring is fastened on the shaft. The allowable axial load shall not exceed 20% of the rated dynamic load. The outer spherical ball bearing with eccentric sleeve has basically the same performance as the outer spherical bearing with top wire, but the top wire is not on the inner ring, but on the eccentric sleeve. The inner hole of the tapered hole outer spherical ball bearing is a tapered hole with a taper of 1:12, which can be directly installed on the tapered shaft, or installed on the shoulderless optical shaft with the help of an adapter bushing, and can fine-tune the bearing clearance.

Pro: 6206S-2RS outer spherical bearing | Next: 6204S-2RS outer spherical bearing

Technical Data of 6205S-2RS outer spherical bearing

6202 bearing

Deep Groove Ball Bearings 6202 The 6202 is a 15 mm Ball Bearing that can be used in many rotary and factory automation applications. The 6202 Deep Groove Ball Bearings is an open style bearing. The 6202Z ball bearing is a single row raceway and single shielded. The 6202ZZ ball b

6902 2rs

ucf 204 bearing

UCF204 is a common designation for a four-bolt flanged bearing unit. It is typically used in various industrial applications to support rotating shafts. The "UCF" stands for "Unit with Four Bolts Flange," and the number "204" refers to the specific bearing size or series. The UC

supercharger bearing

A supercharger bearing is a component used in supercharger systems to support the rotating shaft and reduce friction. Superchargers are devices that compress air and deliver it to the engine, increasing its power output. The bearing plays a crucial role in ensuring smooth and eff

precision ball bearings